|DATE: July 17, 2012||Discovered By: R.Nachlinger|
In some cases, MOSES can "get hung" reading a file.
|DATE: July 20, 2012||Discovered By: John Windus|
The &FILE CP (MV or RM) command does not work on WINDOWS.
|DATE: July 23, 2012||Discovered By: Georgina Maldonado|
Sometimes when doing a solid picture you may get a segfault.
|DATE: July 30, 2012||Discovered By:|
MOSES would not load help files.
|DATE: August 10, 2012||Discovered By: Georgina Maldonodo|
Writing a &UGX macro to a JPG file results in a SEGFAULT on WINDOWS.
|DATE: August 29, 2012||Discovered By: R.Nachlinger|
Need message as to why MOSES "Failed Key Check".
|DATE: September 11, 2012||Discovered By: Georgina Maldonado|
The &SUMMARY COMPART PROPERTIES report is misleading.
|DATE: September 12, 2012||Discovered By: Georgina Maldonado|
SACS WGTMEM cards are not properly converted.
|DATE: September 12, 2012||Discovered By: Keyvan Sarpiti|
The -TOP_MOMENT option does not work for a pipe.
|DATE: October 05, 2012||Discovered By: Barry Miller|
The dynamic winch does not work correctly under certain cases.
|DATE: October 08, 2012||Discovered By: Herm Bussemaker|
Sometimes a raytrace picture will not work in POV Ray.
|DATE: October 08, 2012||Discovered By: Georgina Maldonado|
The &INFO(SENSOR string function may return incorrect values.
|DATE: October 15, 2012||Discovered By: Herm Bussemaker|
Sometimes one can get a seg-fault when painting a gl picture.
|DATE: November 09, 2012||Discovered By: iAnne Hasuly|
The report of waterplane area needs more precision.
|DATE: November 15, 2012||Discovered By: Georgina Maldonado|
&STATUS PRE_COMPARTMENT may give bad results for an empty
|DATE: November 17, 2012||Discovered By: John Evans|
Gfortran on WIN32 has a 2GM file size limit.
|DATE: November 30, 2012||Discovered By: Simon Ritter|
There is a limit of 99 files open at one time.
|DATE: December 10, 2012||Discovered By: Yvan Leipold|
Sometimes the string function &PART will return the CB or CG in the wrong system.
|DATE: December 17, 2012||Discovered By: Herm Busemaker|
In some cases one can get a PROGRAM ERROR in the STRPOST MENU.
|DATE: January 17, 2013||Discovered By: Andy Zhu|
Sometimes you can get a *** PROGRAM ERROR: Valid Command Stack Overflow
|DATE: January 30, 2013||Discovered By: Georgina Moldonado|
Sometimes the "critical" downflooding points will be incorrectly reported.
|DATE: March 09, 2013||Discovered By: Yvan Leipold|
The stress concentration factors defined with &DEFAULT do not work correctly.
|DATE: March 11, 2013||Discovered By: Georgina Maldonado|
Solid rendered images did not show proper mesh subdivision when rendering models.
|DATE: March 19, 2013||Discovered By: Yvan Leipold|
The CLASS DIMENSION report will report the wrong seg_name for shapes from the shapes tables.
|DATE: March 22, 2013||Discovered By: Herm|
&picture -a_size was not working for eps images
|DATE: March 26, 2013||Discovered By: Herm|
Font fixes for titles and interleaved plots and graphs on postscript devices.
|DATE: March 29, 2013||Discovered By: Yvan Leipold|
The SN curves for a string of tubes does not work properly.
|DATE: April 04, 2013||Discovered By: Georgina Maldonodo|
The "design wind" always reports 0 instead of the proper gust duration.
|DATE: April 08, 2013||Discovered By: Barry Miller|
the -WAVE_RUNUP YES option produces some strange results when the body (or part of a body) is either totally submerged or just barely out of the water.
|DATE: April 12, 2013||Discovered By: Barry Miller|
The last fix for wave runup was almost but not quite complete.
|DATE: April 15, 2013||Discovered By: R. Nachlinger|
The drag on a panel which is part of a piece is not computed quite right when the panel is out of the waver and -WAVE_RUNUP NO is used.
|DATE: April 30, 2013||Discovered By: Marco Quadrelli|
You cannot convert a ply model that has more than 9999 points.
|DATE: May 20, 2013||Discovered By: Zigic Boris|
Networks with lots of Peer-to-Peer communication would sometimes fail to find the security server.
|DATE: May 21, 2013||Discovered By: Tecon|
Titles were not displaying correctly in the "Select File" dialog.
|DATE: May 24, 2013||Discovered By: Yvan Leipold|
The is a small bug in converting SACS PGU shapes into MOSES.
|DATE: May 27, 2013||Discovered By: Herm Busemaker|
If one does "a lot" (28) &DESCRIBE PART -MOVE on the body part then WINDOWS will gradually get the wrong answer; i.e. the computations are nor percise enough.
|DATE: May 28, 2013||Discovered By: Yvan Leipold|
The conversion of SACS PGU shapes is incorrect because the SACS Manual is not consistent with the program. This change makes the MOSES converstion consistent with the internal workings of SACS.
|DATE: June 03, 2013||Discovered By: Simon Ritter|
Large databases created on Linux machines could not be used on Windows machines.
|DATE: June 10, 2013||Discovered By: Georgina Maldonado|
&status security returned an error
|DATE: June 12, 2013||Discovered By: Tim Nolte|
If one defines a sea with 2JONSWAP and later in the line changes the period definition from mean with -SP_TYPE PEAK, the GAMMA will be computed as if the period was a mean period instead of a peak one.
|DATE: July 23, 2013||Discovered By: R. Nachlinge|
There is a small bug in the control system.
|DATE: August 02, 2013||Discovered By: S. Ritter|
Old data may not be recovered properly when changing processes.
|DATE: August 05, 2013||Discovered By: R.Nachlinger|
The previous fix broke two test cases.
|DATE: August 19, 2013||Discovered By: R.Nachlinger|
You cannot have over 100000 sub-elements.
|DATE: August 23, 2013||Discovered By:Madada Mashari|
The wrong equation number is printed for section 3.3.1 of the RP2A working stress code check.
|DATE: September 03, 2013||Discovered By: Yvan Leipold|
If one moves a body with slack tanks, the inertia will not be quite correct.
|DATE: September 12, 2013||Discovered by: Bhrain|
One can only apply 64 load attributes to a beam.
|DATE: October 31, 2013||Discovered By: Simon Dilingburg|
Long lines without blanks in loops will not be processed correctly.
|DATE: November 06, 2013||Discovered By: Yvan Leipold|
If you connect a sling with the boom point connected to a point that is not in the body part, MOSES may become confused.
|DATE: November 26, 2013||Discovered By: Marcelo Canga|
Plate fatigue is not correct.
|DATE: December 02, 2013||Discovered By: Vlad Cimpan|
&Describe body xx -ignore y Can ignore the y degree of freedom on the next body.
|DATE: January 08, 2014Discovered By: Tim Habekost|
One may get a PROGRAM ERROR Not enough workspace in ADDCOLM when using a filter. This is a power of 2 issue with the FFT.
|DATE: January 09, 2014Discovered By: Tim Habekost|
The previous fix did not solve the problem.
|DATE: January 24, 2014Discovered By: Tim Hakbekost|
If one tries to use a filter with a large number of points, he may get junk.
|DATE: January 28, 2014Discovered By: Yvan Leipold|
Sometimes the mean wave drift force is not correct.
|DATE: March 24, 2014Discovered By: Georgina Maldonado|
&SURFACE may have a problem (very rare) when performing boolian operations. This shows up as a block moving "too much". Normal "moving" because of conflicts should be around 1mm, but in one test it moved 50mm.
|DATE: April 01, 2014||Discovered By: Yvan Leipold|
If MOSES cannot do a reposition, the "new results" are not correct. This is quite misleading.
|DATE: April 07, 2014||Discovered By: Geogina Maldonado|
You cannot use the GEOMERY command in Connector Design for a pipe.
|DATE: May 12, 2014||Discovered By: P. Sreekumar|
If you are using SI units, the value printed for Von Mieses Stress / Fy in the Beam Stress Report is wrong by a factor of 248/36.